Injin yanka ƙarfe na BS1000 FINCM CNC na'urar yanke ƙarfe ta H-Beam
| Lambar Jeri | Sunan abu | Sigogi | ||
| 1 | Girman sawing na H-beam (ba tare da kusurwar juyawa ba) (tsayin sashe × faɗin flange) | Matsakaicin. 1000 mm × 500 mm Matsakaici. 200 mm × 75 mm | ||
| 2 | ruwan wukake | T: 1.6mm W: 54mm C: 7600mm | ||
| 3 | Ƙarfin mota | Babban injin | 7.5 kW | |
| 4 | famfon na'ura mai aiki da karfin ruwa | 2.2 kW | ||
| 5 | Famfon sanyaya | 0.12 kW | ||
| 6 | Goga mai ƙafa | 0.12kW | ||
| 7 | Juyawa | 0.04 kW | ||
| 8 | Gudun layi na ruwan wukake | 20～80 m/min | ||
| 9 | Yanke ciyarwar abinci | Daidaitawar babu matakai | ||
| 10 | Kusurwar yankewa mai tsauri | 0°～45° | ||
| 11 | Tsawon tebur | Kimanin mm 810 | ||
| 12 | Babban injin hydraulic mai ɗaurewa | 160ml/r | ||
| 13 | Motar haɗaɗɗiyar gaba mai ɗaurewa | 160ml/r | ||
| 14 | Girman injin | L*W*H | Kimanin 4000 × 2420 × 2610 mm | |
| 15 | Jimlar nauyi | Kimanin kilogiram 6000 | ||
1, Ruwan wukake na ƙungiyar yana juyawa kuma yana ɗaukar canjin saurin gudu mara iyaka, wanda za'a iya daidaita shi cikin sauƙi bisa ga kayan aikin yanka daban-daban.
2, Abincin sawing yana amfani da ikon sarrafa na'ura mai aiki da karfin ruwa don cimma abinci mara amfani.
3, Abincin ruwan wuka yana amfani da jagorar shafi biyu, tare da kyakkyawan tauri, babban daidaito da kuma sashin saƙa mai santsi.
4, Ruwan wukake na ƙungiyar yana ɗaukar tashin hankali na hydraulic, wanda ke sa ruwan wukake ya kula da tashin hankali mai kyau a cikin saurin motsi, yana tsawaita rayuwar ruwan wukake, kuma yana magance matsalar maye gurbi mai tasiri.
5, Akwai wata hanya ta kashe wutar lantarki ba zato ba tsammani da kuma kulle hannu a cikin tsarin yankewa don hana firam ɗin yankewa daga zamewa ƙasa.
6, Akwai na'urar gyara mai kyau ta hannu a gaba da bayan ruwan wukake, wanda zai iya yanke kan, tsakiya da wutsiyar katako daidai kuma ya inganta daidaiton yankewa.
7, Yana da aikin daidaitawar Laser, kuma yana iya gano matsayin yanke katako na Beam daidai.
8、Yana da aikin juya jikin zare daga 0° zuwa 45°. Ba ya buƙatar juyawar katakon, amma dukkan injin zai iya kammala yankewa mai lanƙwasa na kowane kusurwa tsakanin 0° da 45°.
9, Ana iya haɗa samfurin tare da injin hakowa na SWZ na jerin 3D da injin niƙa na BM na jerin don samar da layin samar da sassauƙa na kayan aikin injin NC na sakandare don tsarin ƙarfe.
| NO | Suna | Alamar kasuwanci | Ƙasa |
| 1 | Mai sauya mita | INVT/INOVANCE | China |
| 2 | Kamfanin PLC | Mitsubishi | Japan |
| 3 | Bawul ɗin na'ura mai aiki da karfin ruwa na Solenoid | Justmark | Taiwan, China |
| 4 | famfon na'ura mai aiki da karfin ruwa | Justmark | Taiwan, China |
| 5 | Bawul ɗin sarrafa gudu | ATOS | Italiya |
Lura: Wanda ke sama shine mai samar da kayayyaki namu. Ana iya maye gurbinsa da kayan aiki masu inganci iri ɗaya na wani kamfani idan mai samar da kayayyaki da ke sama ba zai iya samar da kayan aikin ba idan akwai wani abu na musamman.
Kamfaninmu yana ƙera injunan CNC don sarrafa nau'ikan kayan aikin ƙarfe, kamar bayanan sandar kusurwa, tashoshin H/U da faranti na ƙarfe.
| Nau'in Kasuwanci | Mai ƙera, Kamfanin Ciniki | Ƙasa / Yanki | Shandong, China |
| Babban Kayayyaki | Injin haƙa ramin CNC/ Injin haƙa ramin CNC/ Injin haƙa farantin CNC, Injin hura farantin CNC | Mallaka | Mai zaman kansa |
| Jimillar Ma'aikata | Mutane 201 – 300 | Jimlar Kuɗin Shiga na Shekara-shekara | Sirri |
| Shekarar da aka kafa | 1998 | Takaddun shaida(2) | |
| Takaddun Shaida na Samfuri | - | Haƙƙin mallaka (4) | |
| Alamomin kasuwanci(1) | Manyan Kasuwannin |
|
| Girman Masana'anta | Murabba'in mita 50,000-100,000 |
| Ƙasa/Yankin Masana'anta | Lamba 2222, Titin Century, Yankin Ci Gaban Fasaha Mai Kyau, Birnin Jinan, Lardin Shandong, China |
| Adadin Layukan Samarwa | 7 |
| Ƙirƙirar Kwantiragi | Ana bayar da sabis na OEM, Ana bayar da sabis na ƙira, Ana bayar da lakabin mai siye |
| Darajar Fitarwa ta Shekara-shekara | Dalar Amurka Miliyan 10 – Dalar Amurka Miliyan 50 |
| Sunan Samfuri | Ƙarfin Layin Samarwa | Ainihin Raka'o'in da aka Samar (Shekarar da ta Gabata) |
| Layin Kusurwar CNC | Saiti 400/Shekara | Saiti 400 |
| Injin hakowa na CNC | Saiti 270/Shekara | Saiti 270 |
| Injin hakowa na CNC | Saiti 350/Shekara | Saiti 350 |
| Injin Busar da Farantin CNC | Saiti 350/Shekara | Saiti 350 |
| Harshe da ake Magana | Turanci |
| Adadin Ma'aikata a Sashen Ciniki | Mutane 6-10 |
| Matsakaicin Lokacin Gabatarwa | 90 |
| Rijistar Lasisin Fitarwa NO | 04640822 |
| Jimlar Kuɗin Shiga na Shekara-shekara | sirri |
| Jimlar Kudaden Shiga na Fitarwa | sirri |
