PLD3016 Gantry Mobile CNC Plate Drilling Machine
| Abu | Suna | Daraja |
| Girmanfarantin karfe | Kauri dagafarantin karfe | Max 80mm/100mm |
| Nisa*Tsawon | 1600mm × 3000mmYanki daya) | |
| 1500mm × 1600mm(Kashi biyu) | ||
| 800mm × 1500mm(Gurasa guda hudu) | ||
| Drilling sandal | Canje-canje mai sauri | Morse 3＃,4＃ |
| Diamita na hakowa shugaban | Φ12mm-Φ50mm | |
| RPM | 120-560r/min | |
| bugun jini | mm 240/ 180mm | |
| Sarrafa ciyarwa | Na'ura mai aiki da karfin ruwa stepless saurin daidaitawa | |
| Haɗaɗɗen ruwa | Kauri na clamping | 15-80mm ku/ 15-100mm |
| Yawan clamping Silinda | guda 12 | |
| Ƙarfin matsawa | 7.5kN | |
| Ruwa mai sanyaya | Yanayin | Zagayen tilastawa |
| Motoci | Spindle | 5.5kW |
| Na'ura mai aiki da karfin ruwa famfo | 2.2kW | |
| Motar cire guntu | 0.4 kW | |
| Mai sanyaya famfo | 0.25 kW | |
| Servo tsarin na X axis | 1.5KW | |
| Servo tsarin Y axis | 1.0kW | |
| Servo tsarin na Z axis | 1.0kW | |
| Gabaɗaya girma | L*W*H | Kusan 5560*4272*mm 2449/ Agirman 6183*2700*2850mm |
| Nauyi (KG) | Babban inji | Kimanin 7600kg/ 5000kg |
| Na'urar Cire Scrap | Kimanin 400kg | |
| Farashin CNC | X, Y(Ikon matsayi na maki)Z (Spindle, ciyarwar ruwa) | |
| Tafiya | X axis | 3000mm |
| Y axis | 1600mm | |
1. Injin yana kunshe da gado, gantry, hakowa ikon shugaban, na'ura mai aiki da karfin ruwa tsarin, kula da tsarin, tsakiya lubrication tsarin, guntu kau tsarin, sanyaya tsarin, sauri canji chuck, da dai sauransu.
2. na'ura mai aiki da karfin ruwa sarrafa bugun jini ikon shugaban ne mu kamfanin ta jadadda mallaka fasaha.Kafin amfani, baya buƙatar saita kowane sigogi.Yana iya canzawa ta atomatik gaba da sauri, aiki gaba da sauri baya.Ana gane ta ta hanyar haɗin gwiwar aikin lantarki da na'ura mai aiki da karfin ruwa.
3. An danne farantin ta hanyar matsewar ruwa kuma ana sarrafa ta ta hanyar sauya ƙafa.
4. Akwai biyu CNC gatari a cikin na'ura: gantry motsi (x axis);motsi na hakowa ikon shugaban a kan gantry beam (Y axis).
5. Injin yana ɗaukar tsarin lubrication na tsakiya don inganta aikin kayan aikin injin da tsawaita rayuwar sabis.
6. Ana kwantar da kayan aikin motsa jiki ta hanyar rarraba ruwa.Akwai abin cire guntu a ƙarƙashin gado, wanda zai iya cire guntu ta atomatik.
7. Tsarin sarrafawa yana ɗaukar babbar manhaja ta kwamfuta software wanda kamfaninmu ya haɓaka kuma ya dace da PLC.Yana da ayyukan tattaunawa na na'ura, ƙararrawa ta atomatik, da dai sauransu. Girman farantin yana iya zama shigarwa ta hanyar madannai na hannu ko U disk interface.
| A'A. | Suna | Alamar | Ƙasa |
| 1 | Hanyar layin jagora | CSK/HIWIN | Taiwan (China) |
| 2 | Na'ura mai aiki da karfin ruwa famfo | Mark kawai | Taiwan (China) |
| 3 | Bawul ɗin lantarki | Atos/YUKEN | Italiya/Japan |
| 4 | Servo motor | Sabuntawa | China |
| 5 | direban Servo | Sabuntawa | China |
| 6 | PLC | Sabuntawa | China |
| 7 | Kwamfuta | Lenovo | China |
Lura: Abin da ke sama shine daidaitaccen mai samar da mu.Abu ne da za a maye gurbinsa da ingantattun sassa iri ɗaya na sauran alama idan mai siyar da ke sama ba zai iya samar da abubuwan haɗin gwiwa ba idan akwai wani abu na musamman.
Bayanan Bayani na Kamfanin 
Bayanin Masana'antu 
Ƙarfin Samar da Shekara-shekara 
Ikon Ciniki 
